Technical Data
- OEM Number:
- MPN:
- Filter Media:
- Micron Rating:
- Engine Family: Wärtsilä 31
- Filter Type: Fuel Suction Strainer
Dimensions
Cross References
Compatible Engines
Application Notes
The Wärtsilä 31 Fuel Oil Suction Strainer is designated 1F02 in Wärtsilä documentation and is part of the fuel transfer and separating system. It is associated with the separator feed pump 1P02. Wärtsilä specifies a suction strainer with a mesh size of about 0.5 mm to protect the feed pump. Applicable to W31 main engines in marine and power plant installations.
Additional Notes
This suction strainer is installed on the suction side of the separator feed pump and is used to remove coarse particles and debris from the fuel before it enters the pump. The strainer helps protect the pump from particulate contamination and blockage. Wärtsilä documentation lists the 1F02 suction strainer together with the separator feed pump 1P02, pre-heater 1E01, sludge tank 1T05 and separator 1S01/1S02 as components of the fuel transfer and separating system. The documentation specifies a mesh size of about 0.5 mm for the suction strainer protecting the feed pump. The exact dimensions, mesh construction and OEM part number should be verified against the applicable Wärtsilä spare-parts documentation before ordering.